Ubiquiti UniFi U6+ WiFi 6 2×2 MIMO Ceiling Access Point (U6+): Compact Dual-Band Wi-Fi 6 AP with 160MHz Channels for Small and Medium Spaces
The Ubiquiti UniFi U6+ (U6-Plus) is a compact, ceiling-mounted dual-band Wi-Fi 6 (802.11ax) access point that upgrades the U6 Lite with 2×2 DL/UL MU-MIMO on both 2.4GHz and 5GHz. Its four spatial streams reach up to 2.4Gbps on 5GHz with 160MHz channels and 573.5Mbps on 2.4GHz, while it covers about 140m² (1,500 ft²) and supports 300+ connected devices. In addition, both radios transmit at up to 23dBm, and OFDMA shares airtime efficiently when many phones and laptops connect at once. Furthermore, it runs on standard 802.3af PoE at just 9W, so it works with almost any PoE switch through a single Gigabit port. Its Ø160 x 33mm body ships with ceiling and wall mounts, and the UniFi Network application adds WPA3, guest isolation, VLANs, RadSec and dynamic RADIUS-assigned VLANs.
In practice, the U6+ suits homes and small businesses moving from Wi-Fi 5 to Wi-Fi 6 on a budget. For example, a dental clinic in Lavington can fit one in the reception and one in the treatment wing, giving patients guest Wi-Fi while front-desk HP Desktops stay on the wired network. Similarly, a two-storey home in Syokimau can place one per floor and roam between them on one network name. Meanwhile, its low 9W draw means a small PoE switch on a UPS keeps Wi-Fi running through KPLC outages. Compared with the UAP-AC-Lite, it adds Wi-Fi 6, 160MHz channels and higher 2.4GHz speed. Note that the PoE injector is not included, and it needs UniFi Network 7.3.76 or later.
Key Features
In short, this access point stands out in five areas:
- Dual-band Wi-Fi 6, 2×2 MU-MIMO on 2.4GHz and 5GHz (4 streams)
- Up to 2.4Gbps on 5GHz (160MHz) and 573.5Mbps on 2.4GHz
- 140m² coverage and 300+ connected devices
- Standard 802.3af PoE, only 9W max. power draw
- Compact Ø160mm design with ceiling and wall mounts included
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti U6+:
| Specification | Details |
|---|---|
| Brand | Ubiquiti UniFi |
| Model | U6-PLUS (U6+) |
| Product Type | Ceiling-mount dual-band Wi-Fi 6 access point |
| Wi-Fi Standards | 802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| Bands | 2.4GHz, 5GHz |
| Spatial Streams | 4 |
| MIMO | 2×2 DL/UL MU-MIMO on 5GHz and 2.4GHz |
| Max. Data Rate | 5GHz: 2.4Gbps (160MHz); 2.4GHz: 573.5Mbps (40MHz) |
| Supported Data Rates | 802.11ax: 7.3Mbps to 2.4Gbps (MCS0–MCS11 NSS1/2, HE 20/40/80/160); 802.11ac: 6.5Mbps to 1.7Gbps; 802.11n: 6.5Mbps to 300Mbps |
| Antenna Gain | 5GHz: 5.4dBi; 2.4GHz: 3dBi |
| Max. TX Power | 5GHz: 23dBm; 2.4GHz: 23dBm |
| Max. BSSIDs | 8 per radio |
| Coverage Area | 140m² (1,500 ft²) |
| Max. Client Count | 300+ |
| Wireless Security | WPA-PSK, WPA-Enterprise, WPA2, WPA3 |
| Wireless Features | Guest traffic isolation, VLAN (802.1Q), RADIUS over TLS (RadSec), dynamic RADIUS-assigned VLAN |
| Networking Interface | 1 x GbE RJ45 port |
| Management | Ethernet; UniFi Network 7.3.76 or later |
| Power Method | 802.3af PoE (injector not included) |
| Supported Voltage Range | 44–57V DC |
| Max. Power Consumption | 9W |
| LEDs | White/blue |
| Button | Factory reset |
| Enclosure | Polycarbonate, aluminium |
| Mount Material | ABS, SGCC steel |
| Mounting | Ceiling, wall (mounts included) |
| Dimensions | Ø160 x 33mm |
| Weight | 338g (413g with mount) |
| Operating Temperature | -30 to 60°C |
| Operating Humidity | 5–95% non-condensing |
| Certifications | CE, FCC, IC |
Who This Access Point Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- Homes and apartments upgrading to Wi-Fi 6 with one AP per floor
- Small clinics, offices and shops that need guest Wi-Fi and VLANs at low cost
- Businesses replacing UAP-AC-Lite units on existing 802.3af PoE switches


Reviews
There are no reviews yet.