Ubiquiti airMAX NanoStation AC 5GHz 802.11ac (NS-5AC): Compact 16dBi CPE and Point-to-Point Bridge with PoE Passthrough
The Ubiquiti NanoStation AC (NS-5AC) is a compact outdoor 5GHz airMAX AC radio that combines a 16dBi dual-polarised antenna and the radio in one 233g body. It works as a customer premises device (CPE) that connects to a WISP base station, or in pairs as a point-to-point (PtP) wireless bridge between two buildings. In addition, it delivers up to 450+ Mbps real TCP/IP throughput and has two Gigabit Ethernet ports. The secondary port provides software-enabled PoE passthrough, so it can power a PoE IP camera or another small device on the same mast. Furthermore, a dedicated 2.4GHz management radio lets installers set it up from a phone, and airOS 8 adds RF analytics and an airView spectrum analyser for choosing a clean channel.
In practice, the NanoStation AC is a common sight on rooftops in Kenyan estates served by wireless internet providers. For example, a home in Syokimau or a shop in Rongai can mount one on the roof and point it at the WISP’s sector, then run a single cable indoors to the router. Similarly, a business with two buildings a few hundred metres apart, such as a workshop and an office in Industrial Area, can pair two units to share one internet line and link staff on HP Desktops to the main server. Meanwhile, the PoE passthrough port can power a gate camera next to the radio, which saves an extra cable run. Because it handles -40 to 70°C and carries ±24kV ESD/EMP protection, it also suits exposed masts in dusty or coastal areas.
Key Features
In short, this airMAX NanoStation stands out in five areas:
- 16dBi dual-polarised antenna with a 45° beamwidth on 5GHz (5150–5875MHz)
- Up to 450+ Mbps real TCP/IP throughput with airMAX AC
- 2 x Gigabit Ethernet ports, with PoE passthrough on the secondary port
- Dedicated 2.4GHz management radio for app-based setup
- Compact 233g body with pole and wall mounting included
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti NS-5AC:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP airMAX) |
| Model | NS-5AC (NanoStation AC) |
| Product Type | 5GHz airMAX AC CPE / PtP radio |
| Operating Frequency | 5150–5875MHz (worldwide) |
| Management Radio | 2412–2472MHz (worldwide) |
| Antenna Gain | 16dBi |
| Beamwidth | 45° (H-pol) / 45° (V-pol) / 45° (elevation) |
| Polarisation | Dual-linear |
| Cross-Pol Isolation | 20dB minimum |
| Max. VSWR | 1.6:1 |
| Throughput | Up to 450+ Mbps real TCP/IP |
| Channel Bandwidths | 10/20/30/40/50/60/80MHz |
| Software | airOS 8 |
| Processor | Atheros MIPS 74Kc, 560MHz |
| Memory | 64MB DDR2, 8MB flash |
| Networking Interface | 2 x 10/100/1000 Ethernet ports |
| PoE Passthrough | Software-enabled, secondary port |
| LEDs | Power, ETH1, ETH2, 4 x signal strength |
| Power Supply | 24V, 0.5A Gigabit PoE adapter (included) |
| Power Method | 802.3af Alternative A (pairs 1, 2+; 3, 6 return) or 24V passive PoE (pairs 4, 5+; 7, 8 return) |
| Supported Voltage Range | 24V ±10% |
| Max. Power Consumption | 9W |
| ESD/EMP Protection | ±24kV contact/air |
| Dimensions | 257 x 84 x 30mm (without mount); 257 x 84 x 41mm (with mount) |
| Weight | 233g |
| Mounting | Pole and wall mounting kits included |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5–95% non-condensing |
| Certifications | CE, FCC, IC |
| In the Box | NanoStation AC, wall mount bracket, 2 x screws, 2 x screw anchors, 2 x zip ties, 24V 0.5A Gigabit PoE adapter, power cord, quick start guide |
Who This NanoStation Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- WISP subscribers and installers who need a reliable client radio on homes, shops and offices
- Businesses and farms with two sites that want a low-cost PtP bridge between buildings
- CCTV installers who power a PoE camera from the radio’s secondary port at remote points


Reviews
There are no reviews yet.