Ubiquiti EdgeRouter X SFP (ER-X-SFP)

KSh 13,000

In StockReady to ship
  • Fast DeliveryWe deliver to all towns & cities in Kenya
  • Warranty InclusiveThis product is covered by warranty

Available on backorder

Ubiquiti EdgeRouter X SFP (ER-X-SFP)
Ubiquiti EdgeRouter X SFP (ER-X-SFP)
KSh 13,000

Ubiquiti EdgeRouter X SFP (ER-X-SFP): Compact Gigabit Router with SFP Fibre Port and 24V Passive PoE for up to Five airMAX Radios

The Ubiquiti EdgeRouter X SFP (ER-X-SFP) is a compact EdgeMAX router with five Gigabit RJ45 ports and one Gigabit SFP port for a fibre uplink. Unlike the standard EdgeRouter X, it acts as a power source: all five RJ45 ports can supply 24V passive PoE, from a 50W total PoE budget, so one unit can power up to five airMAX radios such as NanoStations and LiteBeams. In addition, a dual-core 880MHz MIPS1004Kc processor, 256MB of DDR3 RAM and 256MB of NAND storage run EdgeOS, which supports static routing, OSPF, VLANs, firewall rules and VPNs. Furthermore, the ports can also run as a line-rate Layer 2 switch where you need it. The router itself draws only 5W, measures 142 x 75 x 23mm and can be wall-mounted. As a result, it fits in a small tower or rooftop enclosure where space and power are limited.

In practice, the ER-X-SFP suits wireless ISP towers and remote sites where a fibre or wireless backhaul feeds several radios. For example, a WISP in Kitengela can bring fibre into the SFP port, then power and route traffic to four or five airMAX sector or point-to-point radios from one box, instead of using separate PoE injectors. Similarly, a farm in Laikipia can link its main house, workshop and staff quarters over airMAX radios, while the farm office’s HP Desktops connect to a wired port. Meanwhile, because the router and all five radios run from one 24V adapter, a single small UPS can keep the whole tower running through KPLC outages. However, the PoE output is 24V passive only, so enable it only on ports that connect to 24V passive devices; 48V 802.3af/at devices, such as UniFi cameras and access points, need a separate PoE switch.

Key Features

In short, this EdgeRouter stands out in five areas:

  • 5 x Gigabit RJ45 ports + 1 x Gigabit SFP fibre port
  • 24V passive PoE output on all five RJ45 ports, 50W total budget
  • Dual-core 880MHz CPU, 256MB RAM, 256MB NAND running EdgeOS
  • Advanced routing: static routes, OSPF, VLANs, firewall and VPN
  • Compact, wall-mountable 215g body drawing just 5W

Technical Specifications

Specifically, the table below details every core specification of the Ubiquiti ER-X-SFP:

SpecificationDetails
BrandUbiquiti (UISP EdgeMAX)
ModelER-X-SFP (EdgeRouter X SFP)
Product TypeGigabit router with PoE and SFP
Operating SystemEdgeOS
ProcessorDual-core 880MHz, MIPS1004Kc
System Memory256MB DDR3 RAM
Code Storage256MB NAND
Data/PoE Ports5 x 10/100/1000 RJ45
Data Port1 x 100/1000 SFP
SwitchingPorts configurable for line-rate Layer 2 switching
Packet Performance130kpps (64-byte packets); 1Gbps (1518-byte packets)
PoE OutputPassive 24V (pins 4, 5+; 7, 8−)
Max. Total PoE Output50W @ 24V
Power Input24V DC, 2.5A power adapter (included)
Max. Power Consumption5W (excluding PoE output)
ManagementWeb GUI, CLI via SSH, Telnet and serial console
Wall-MountYes
Dimensions142 x 75 x 23mm
Weight215g
Operating Temperature-10 to 45°C
Operating Humidity10–90% non-condensing
CertificationsCE, FCC, IC
In the BoxER-X-SFP, 24V 2.5A power adapter, power cord, quick start guide

Who This EdgeRouter Is Best Suited For

As a result of this combination of specs, three types of users benefit most:

  • Wireless ISPs (WISPs) that power and route several airMAX radios from one tower box
  • Farms, estates and remote sites that link outlying buildings over airMAX with a fibre or wireless backhaul
  • Network technicians who want a low-cost, low-power router with fibre input and full routing control

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.