Ubiquiti PoE Injector 24VDC, 24W, 1A (POE-24-24W-G-WH): High-Power Gigabit Passive PoE Adapter for 24V UISP and airMAX Radios
The Ubiquiti POE-24-24W-G-WH is a high-power, single-port passive PoE injector that sends 24V DC at up to 1A (24W) and Gigabit Ethernet data over one cable to a 24V passive PoE device. It sits between your switch or router and an outdoor radio, so the radio needs no separate power cable at the top of the mast. In addition, it accepts 100–240V AC mains and delivers power on pins 4, 5 (+) and 7, 8 (−), the standard Ubiquiti 24V passive PoE layout. Furthermore, it includes surge and clamping protection and an AC cable with earth ground, which help drain static and voltage spikes away from the radio and the network. Its white housing measures 88 x 57 x 33mm and weighs 159g. As a result, it suits higher-draw 24V radios and long cable runs where a lower-wattage 24V adapter would run near its limit.
In practice, many Kenyan WISPs and installers keep spare 24V injectors, because lightning and power surges often damage the original adapter long before the radio fails. For example, a WISP technician in Kitengela can swap a failed adapter on a customer’s NanoStation or PowerBeam in minutes and restore service the same day. Similarly, a farm in Nanyuki running a long point-to-point link can use the 24W model to keep enough headroom on a 60–80m cable run to the mast. Meanwhile, an office in Westlands can power a rooftop bridge while its HP Desktops share the Gigabit link to the branch. However, the output is 24V passive only, so never connect it to 802.3af/at devices, 48V devices or laptops; always confirm the device lists 24V passive PoE input.
Key Features
In short, this PoE injector stands out in five areas:
- 24V DC at 1A (24W) passive PoE output
- Gigabit Ethernet data pass-through
- Surge and clamping protection with an earth-grounded AC cable
- Universal 100–240V AC input with 80%+ efficiency
- Compact 88 x 57 x 33mm, 159g white housing
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti POE-24-24W-G-WH:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP) |
| Model | POE-24-24W-G-WH |
| Product Type | Passive PoE injector (single port) |
| Colour | White |
| Output Voltage | 24V DC @ 1A |
| Max. Output Power | 24W |
| PoE Type | 24V passive |
| Powering Pins | Pins 4, 5 (+) and 7, 8 (−) |
| Gigabit LAN Port | Yes |
| Ports | 2 x RJ45 (LAN in, PoE out) |
| Input Voltage | 100–240V AC, 50/60Hz |
| Input Current | 0.3A @ 120V AC; 0.2A @ 230V AC |
| Inrush Current | <60A peak @ 120V AC; <120A peak @ 230V AC |
| Efficiency | 80%+ |
| Output Ripple | 1% max. |
| Switching Frequency | 65kHz |
| Line Regulation | ≤3% |
| Protection | Surge protection, clamping protection, peak pulse and surge discharge rated |
| Response Time | <1ns |
| AC Cable | Earth-grounded |
| Dimensions | 88 x 57 x 33mm |
| Weight | 159g |
| Operating Temperature | 0 to 40°C |
| Certifications | CE, FCC, IC, UL |
| In the Box | PoE injector, AC power cord |
Who This PoE Injector Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- WISP technicians and installers who need spare 24V adapters for airMAX and UISP radios
- Farms, estates and businesses running long cable runs to rooftop or mast-mounted 24V radios
- Network integrators powering higher-draw 24V passive devices where a 12W adapter is too small


Reviews
There are no reviews yet.