Ubiquiti Multi-Gig RJ45 SFP+ Module (UACC-CM-RJ45-MG): Turn an SFP+ Port into a 10/5/2.5/1GbE Copper Port
The Ubiquiti UACC-CM-RJ45-MG is an SFP+ to RJ45 transceiver module that plugs into an SFP+ port and accepts a standard copper Ethernet cable. It supports four data rates: 10GbE, 5GbE, 2.5GbE and 1GbE, so a single module connects to 10G servers as well as 2.5GbE Wi-Fi 6 and Wi-Fi 7 access points. In addition, it reaches up to 100m at 10Gbps over Cat 6A cable and draws a maximum of 1.9W. As a result, you can use the SFP+ ports on a UniFi gateway or switch for copper links instead of fibre. Moreover, it replaces the older UACC-CM-RJ45-10G and UF-RJ45-10G modules.
In practice, many UniFi switches and gateways, such as the Dream Machine Pro and the Pro Max switch range, ship with SFP+ ports while most NAS units, servers and workstations still use RJ45. Therefore, this module bridges the two without a media converter. For example, a production studio in Kilimani can link a 10GbE NAS straight to the switch, and an office in Westlands can connect editing PCs or HP Desktops fitted with 2.5GbE or 10GbE network cards. Similarly, a school in Eldoret can run a multi-gig uplink to a classroom switch over existing Cat 6A cabling. Because it negotiates the speed automatically, the same module also works with 1GbE devices as you upgrade the network in stages.
Key Features
In short, this SFP+ module stands out in five areas:
- Four speeds: 10GbE, 5GbE, 2.5GbE and 1GbE on one RJ45 port
- Up to 100m at 10Gbps over Cat 6A copper cable
- Low 1.9W maximum power draw
- Wide 0 to 70°C operating range for closed racks and cabinets
- Replaces the UACC-CM-RJ45-10G and UF-RJ45-10G modules
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti UACC-CM-RJ45-MG:
| Specification | Details |
|---|---|
| Brand | Ubiquiti UniFi |
| Model | UACC-CM-RJ45-MG |
| Product Type | 10G SFP+ to 10/5/2.5GbE RJ45 module |
| Form Factor | SFP+ |
| Supported Media | Copper |
| Connector Type | RJ45 |
| Data Rate | 1/2.5/5/10 Gbps |
| Max. Cable Distance | 100m at 10Gbps (Cat 6A) |
| Max. Power Consumption | 1.9W |
| Operating Temperature | 0 to 70°C |
| Pack Option | 1-pack |
| Replaces | UACC-CM-RJ45-10G, UF-RJ45-10G |
Who This SFP+ Module Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- UniFi network integrators who need copper links from gateway or switch SFP+ ports to RJ45 devices
- Studios, agencies and offices that connect a 10GbE NAS, server or workstation to a UniFi switch
- Schools and SMEs that run multi-gig uplinks to Wi-Fi 6/7 access points or classroom switches over Cat 6A cable


Reviews
There are no reviews yet.