The Ubiquiti TCLCON-GND/1 is a RJ45 Plug boasting a crimp grip for the drain wire and also a ground wire for rapid, solderless field deployment. The TCLCON-GND/1 has been designed specifically for use with Ubiquiti ToughCable.
Key Features
- Category 6 UTP
- CMP flame rating
- Available in lengths of 1,000 ft
The post Ubiquiti UniFi Cable Cat6 CMP (UC-C6-CMP) -1000ft first appeared on Ubiquiti Kenya.
]]>The Ubiquiti UniFi Cat6 Cable (UC-C6-CMP) is a Category 6 indoor Ethernet cable, designed for UniFi and general indoor network deployments that require plenum-rated cabling.
Ubiquiti UniFi Cable (UC-C6-CMP) Key Features
- Category 6 UTP
- 23 AWG solid copper conductor twisted pair
- CMP flame rating
- For 1000BASE-T Ethernet applications (bandwidth speed test up to 600 MHz for reference)
- Available in lengths of 1,000 ft (305
The UC-C6-CMP is available in lengths of 1000 ft (305 m) and is Category 6 UTP (Unshielded Twisted Pair) cabling that supports speeds of up to 1 Gbps. It uses 23 AWG solid copper conductor pairs and an anti-crosstalk divider, which improves pair isolation
CMP (Communications Multipurpose cable, Plenum) cabling is for use in plenum areas where air is typically circulated in a building. Cables for these areas must adhere to strict manufacturing requirements, ensuring that they can be used in these spaces.
The post Ubiquiti UniFi Cable Cat6 CMP (UC-C6-CMP) -1000ft first appeared on Ubiquiti Kenya.
]]>- 1Gbps or 10Gbps capacities
- The cable is copper and incorporates SFP modules.
- Designed for UniFi switches to chain between communication cabinets/boxes.
SFP+ 10G passive copper cables can be used for short distance 10Gbps transmission. Transceiver cables are perfect solution for a server room applications.
The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 3m (UDC-3) first appeared on Ubiquiti Kenya.
]]>The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Models: UDC-1, UDC-2 and UDC-3
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget.
The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 3m (UDC-3) first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 2m (UDC-2) first appeared on Ubiquiti Kenya.
]]>The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Models: UDC-1, UDC-2 and UDC-3
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget.
The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 2m (UDC-2) first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 1m (UDC-1) first appeared on Ubiquiti Kenya.
]]>Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 1m (UDC-1)
The Ubiquiti UDC-1 is a Direct Attach Copper Cable capable of 10Gbps throughput at 1m in length. The Ubiquiti SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications.
SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cost achieving reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability
The post Ubiquiti UniFi Direct Attach Copper Cable 10Gbps – 1m (UDC-1) first appeared on Ubiquiti Kenya.
]]>The Ubiquiti Networks UISP-Cable-Pro is a Category 5e cable with a highly insulating, .50 mm thick weatherproof jacket that prevents damage from rain, snow, and other extreme climatic conditions. The cable is also fortified with a
.060 mm internal foil shielding with 18 mm extent and a .4 CCS drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
The post Ubiquiti TOUGHCable PRO (UISP-Cable-Pro) – 1000 ft first appeared on Ubiquiti Kenya.
]]>The Ubiquiti TOUGHCable UISP-Cable-Pro (previously called TC-PRO) is a Category 5e, outdoor, carrier-class shielded cable with an integrated ESD drain wire.
Ubiquiti TOUGHCable UISP-Cable-Pro Key Features
- Increased Performance Dramatically
- Weatherproof
- ESD Damage Protection
- Multi-layered shielding
- Length: 1000 ft
Ubiquiti TOUGHCable is currently available in Level 1 Shielding Protection, Category 5e outdoor carrier-class shielded cable.
Protection Against ESD Attacks
ESD attacks are overwhelmingly the leading cause for device failures. The diagram below illustrates the areas vulnerable to ESD attacks in a defenseless network. By using a grounded Ubiquiti Power over Ethernet (PoE) adapter along with Ubiquiti TOUGHCable and Ubiquiti TOUGHCable Connectors, you can effectively protect yourself against ESD attacks.
Ubiquiti TOUGHCable Connectors
Specifically designed for use with Ubiquiti TOUGHCables and available in 1 or 100 pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.
Available Options:
|
 |
TOUGHCable UISP-Cable-Pro Technical Specifications
Cable
- CAT5e, Shielded
Ethernet Support
- Up to 1 Gbps
Conductor Wire Gauge
- 24 AWG
Conductor
- Solid Bare Copper
Conductor Diameter
- 0.500 ± 0.005 mm
Insulation Type
- Solid PE
Insulation Thickness
- AVG: 0.26 mm, MIN: 0.25 mm
Insulation Diameter
- 1.04 ± 0.03 mm
Separation (Polyester Wrapping)
- Thick: 0.025 mm, Extent: 20 mm
Anti-Crosstalk Divider
- None
Cable Shield (Aluminum Foil)
- Thick: 0.060 mm, Extent: 18 mm
ESD Drain Wire
- 0.4 CCS
Rip Cord
- Yes
Jacket Material
- PE
Jacket Thickness
- AVG: 0.50 mm, MIN: 0.46 mm
Jacket Outer Diameter
- 6.0 ± 0.30 mm
Jacket Color
- Gray
Reference Standard
- ISO/IEC 11801, TIA/EIA568B.2
The post Ubiquiti TOUGHCable PRO (UISP-Cable-Pro) – 1000 ft first appeared on Ubiquiti Kenya.
]]>Key Features
- Anti-Crosstalk Divider
- Braid Shield
- Foil Shield
The post Ubiquiti TOUGHCable TC CARRIER – 1000 ft (UISP-Cable-Carrier) first appeared on Ubiquiti Kenya.
]]>The Ubiquiti TOUGHCable UISP-Cable-Carrier (previoulsy called TC-CARRIER) is a Category 5e, outdoor, carrier-class shielded cable with an integrated ESD drain wire. Its impressive features provide optimal performance on Gigabit Ethernet networks.
Ubiquiti TOUGHCable TC-CARRIER (UISP-Cable-Carrier) Key Features
- Anti-Crosstalk Divider
- Braid Shield
- Foil Shield
- Weatherproof
- Increases Performance Dramatically
- ESD Damage Protection
- Length: 1000 ft
Ubiquiti TOUGHCable CARRIER is currently available as a Level 1 Shielding Protection, Category 5e, outdoor carrier-class shielded cable.
Protection Against ESD Attacks
ESD attacks are overwhelmingly the leading cause for device failures. The diagram below illustrates the areas vulnerable to ESD attacks in a defenseless network. By using a grounded Ubiquiti Power over Ethernet (PoE) adapter along with Ubiquiti TOUGHCable and Ubiquiti TOUGHCable Connectors, you can effectively protect yourself against ESD attacks.
Ubiquiti TOUGHCable Connectors
Specifically designed for use with Ubiquiti TOUGHCables and available in 1 or 100 pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.
Available Options:
|
|
Ubiquiti TOUGHCable TC-CARRIER (UISP-Cable-Carrier) – Technical Specifications
Cable
- CAT5e, Shielded
Ethernet Support
- Up to 1 Gbps
Conductor Wire Gauge
- 24 AWG
Conductor
- Solid Bare Copper
Conductor Diameter
- 0.500 ± 0.005 mm
Insulation Type
- Solid PE
Insulation Thickness
- AVG: 0.295 mm, MIN: 0.29 mm
Insulation Diameter
- 1.16 ± 0.02 mm
Separation (Polyester Wrapping)
- Thick: 0.025 mm, Extent: 20 mm
Anti-Crosstalk Divider
- LDPE: 4.2*0.3 mm
Cable Shield (Aluminum Foil)
- Thick: 0.060 mm, Extent: 20 mm
ESD Drain Wire
- 0.4 TC
Rip Cord
- Yes
Secondary Cable Shield (Braid)
- 16*8*0.16AA Density: 95%
Jacket Material
- PE
Jacket Thickness
- AVG: 0.52 mm, MIN: 0.46 mm
Jacket Outer Diameter
- 6.8 ± 0.30 mm
Jacket Color
- Gray
Reference Standard
- ISO/IEC 11801, TIA/EIA568B.2
The post Ubiquiti TOUGHCable TC CARRIER – 1000 ft (UISP-Cable-Carrier) first appeared on Ubiquiti Kenya.
]]>Key Features
- Category 5e Compliance
- Shielded Design
- ESD Protection
- Designed for Ubiquiti TOUGHCable
The post Ubiquiti TOUGHCable CAT5e 1 Connector TC-CON first appeared on Ubiquiti Kenya.
]]>TOUGHCable Connectors (TC-CON) protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering. The Ubiquiti TC-CON is specifically designed for use with the Ubiquiti TC-PRO and TC-CARRIER.
The post Ubiquiti TOUGHCable CAT5e 1 Connector TC-CON first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti TOUGHCable RJ45 Plug with Ground Wire (TCLCON-GND/1) first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti TOUGHCable RJ45 Plug with Ground Wire (TCLCON-GND/1) first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti TOUGHCable CAT5e 100 Connectors first appeared on Ubiquiti Kenya.
]]>The TOUGHCable CAT5e Connectors are specifically designed for use with Ubiquiti TOUGHCables and available in 20 or 100 pc. Bags. They protect against ESD attacks and Ethernet hardware damage whilst allowing rapid field deployment without soldering.
- Product Name: Ubiquiti TOUGHCable Connectors
- Model: TC-CON-100 (100-pack)
- Compatibility: Designed specifically for Ubiquiti TOUGHCable Carrier and Pro models.
Physical Specifications
- Type: Shielded RJ45 connectors
- Material:
- Connector Housing: High-quality plastic
- Shielding: Metal for enhanced protection against interference
- Quantity: 100 connectors per box
- Pins: 8P8C (8-position, 8-contact configuration)
Performance
- Cable Compatibility: Cat5e Ethernet cable
- Shielding: Fully shielded to reduce electromagnetic interference (EMI) and improve performance in noisy environments.
- Data Rates: Supports up to Gigabit Ethernet speeds.
Environmental
- Usage: Ideal for both indoor and outdoor installations.
- Weatherproofing: Enhanced durability and shielding for reliable outdoor performance.
Ease of Use
- Tool Compatibility: Compatible with standard RJ45 crimping tools.
- Installation: Quick and easy termination process.
The post Ubiquiti TOUGHCable CAT5e 100 Connectors first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti Single-Mode LC FiberCable 100ft (FC-SM-100) first appeared on Ubiquiti Kenya.
]]>- Ubiquiti Ufiber FC-SM-100 is a 100ft of Ubiquiti networks single mode LC fiber optic cable
- Ubiquiti fiber cable can be used outside, with integrated weatherproof tape and outdoor jacket.
- Ubiquiti Outdoor Fiber is steel-armored fiber cable is ideal for outdoor fiber networks, and it’s great for tower deployments
- FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as the EdgePoint. Available in 100, 200, and 300 ft lengths.
- Outdoor-Rated Jacket with Ripcord, Integrated Weatherproof Tape, Kevlar Yarn for Added Tensile Strength, Outer Diameter of Cable: 6.0 ± 0.2 mm, Six-Strand Single-Mode G.657.A2), Outer Diameter of Fiber Strand: 0.25 mm Nominal, Insertion Loss, 1310 nm: ≤0.5 dB/km, 1550 nm: ≤0.5 dB/km.
The post Ubiquiti Single-Mode LC FiberCable 100ft (FC-SM-100) first appeared on Ubiquiti Kenya.
]]>