| BRAND | Ubiquiti Networks |
|---|---|
| ITEM MODEL NUMBER | NS-WM |
| ITEM WEIGHT | 10.4 ounces |
| PRODUCT DIMENSIONS | 18 x 6 x 6 inches |
| ITEM DIMENSIONS LXWXH | 18 x 6 x 6 inches |
| MANUFACTURER | Ubiquiti |
| ASIN | B004EHUR8U |
| IS DISCONTINUED BY MANUFACTURER | No |
| DATE FIRST AVAILABLE | August 10, 2009 |
Key Features
- Frequency 2.5 GHz
- Throughput 150+ Mbps
- Range 13+ km
The post Ubiquiti NanoStation M2 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>The Ubiquiti NanoStation M2 features 2×2 MIMO technology and 150+ Mbps real outdoor throughput up to 15km+ range. This therefore allows for links that are significantly faster and farther than ever before.Ubiquiti NanoStation M2 Key Features
- Great Performance
- Dual Ethernet Connectivity
- POE Enabled
- Easy Installation
- Range: 13+ km
The low cost, hi-performance, and small form factor of the Ubiquiti NSM2, makes them extremely versatile and ideal in several different applications.
Next-Gen Antenna Design
New antenna array designs featuring 11dBi dual-polarity 11dBi at 2.4GHz. Optimised cross-polarity isolation and in a compact form-factor.
Integrated AirMax Technology
Unlike standard WiFi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.
Dual Ethernet Connectivity
The Ubiquiti NanoStation M2 provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Intelligent PoE
Remote hardware reset circuitry of Ubiquiti NanoStation M2 allows for device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation M2 can easily become 802.3af 48V compliant through use of Ubiquiti’s Instant 802.3af adapter.
AirOS V
Version 5 of Ubiquiti’s AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
The post Ubiquiti NanoStation M2 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>Key Features
- Frequency 5 GHz
- Throughput 150+ Mbps
- Range 15+ km
The post Ubiquiti NanoStation M5 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>The Ubiquiti NanoStation M5 (NSM5) is a high performance, low cost and extremely versatile Point-to-Point wireless bridge. The NSM5 comes with a redesigned, sleek and elegant form-factor, along with integrated Ubiquiti airMax (MIMO TDMA Protocol) technology.
Ubiquiti NanoStation M5 Key Features:
- Great Performance
- Dual Ethernet Connectivity
- PoE Enabled
- Frequency 5 GHz
- Throughput 150+ Mbps
- Range 15+ km
The Ubiquiti NanoStation M5 features 150+ Mbps real outdoor throughput and up to 15km+ range, with 2×2 MIMO technology, meaning the NSM5 links significantly faster and further than ever before.
Next-Gen Antenna Design
New antenna array designs featuring 16dBi dual-polarity gain at 5GHz. Optimised cross-polarity isolation and in a compact form-factor.
Integrated AirMax Technology
Unlike standard WiFi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) AirMax protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
Dual Ethernet Connectivity
The Ubiquiti NanoStation M5 provides a secondary Ethernet port with software enabled PoE output for seamless IP Video integration.
Intelligent PoE
Remote hardware reset circuitry of Ubiquiti NanoStation M5 allows for device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation M5 can easily become 802.3af 48V compliant through use of Ubiquiti’s Instant 802.3af adapter. Remote reset is an additional option.
AirOS V
Version 5 of Ubiquiti’s airOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
The post Ubiquiti NanoStation M5 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>Key Features
- Intelligent QoS Priority
- Capable of high-speed, carrier-class links
- PoE Enabled
The post Ubiquiti NanoStation Loco M2 MIMO, Point-to-Point Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>Key Features
- Connect two remote locations on the one network
- Share Internet connection between buildings, remote sites, etc.
- Up to 200mW output power, 2×2 MIMO operation, 100Mbps
- Integrated AirOS web software for controlling power, bridge/AP mode, etc.
- Includes POE injector and 240V AC adaptor
- Two units required for wireless bridge.
What is a NanoStation LOCO?
- If you’ve checked out the Ubiquiti NanoStation, the more cost effective LOCO version is simply a lower power unit designed for shorter distances
- There are some features, such as Dual-Ethernet capabilities, that the LOCO version doesn’t have, so if in doubt, please read through the specification sheet at the bottom of the page.
High Speed Point-to-Point Networking
- Forget Ethernet cable, the Ubiquiti NanoStation LOCO is ideal for bridging networks or sharing broadband between buildings
- To install, place the units at either end of the network and connect both to Ethernet cables – for example, connect the first unit into your modem at location one, and connect the second into an Ethernet switch or WiFi access point at the other location
- Face both units so they point towards each other and the link is established. Simple!
- This is a transparent data-link layer bridge, not a routed bridge – this means that you are creating a virtual ethernet cable between the two facilities, making network setup incredibly simple – no routing configuration, all protocols (DHCP, DNS, etc) just work
- Management of the Ubquiti device couldn’t be easier with SSH and SNMP protocol support, as well as a very intuitive HTTP interface.
802.11b/g/n WiFi Access Point
- Login to the AirOS management software and set to AP mode to create a high performance WiFi network
- With a wide directional broadcast angle the NanoStation LOCO is ideal for covering sports grounds and outdoor areas by a sector-by-sector approach
- You can learn how to set up the NanoStation as a long range WiFi access point by following our Guide to extend WiFi coverage using an Ubiquiti NanoStation
Ready to Install
- This unit has all networking hardware integrated and is completely weatherproof for permanent installation in even the toughest environments
- Signal strength indicators allow for quick and easy alignment. For best performance the unit should be roof mounted, high and clear of obstructions, via it’s integrated pole mounting bracket
- The units are powered via Power over Ethernet (PoE) – simply plug one end of the Ethernet cable into the NanoStation, and the other into the PoE Injector (which is plugged into AC power)
- This allows one cable to both power the unit and also carry network traffic. We recommend using Cat6 Outdoor UV Shielded Cable with this unit.
The post Ubiquiti NanoStation Loco M2 MIMO, Point-to-Point Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>Key Features
- Throughput – 150+ Mbps
- Range – 10+ km
- on-board LED indicator
The post Ubiquiti NanoStation Loco M5 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>The Ubiquiti NanoStation Loco M5 provides a secondary ethernet port with software enabled PoE output for seamless IP Video integration. The unit features a panel antenna and dual-polarity performance, which is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices.
Ubiquiti airMAX NanoStation Loco M5 Features
- Connect two locations or points via wireless, with 5Ghz 802.11n
- Throughput – 150+ Mbps
- Range – 10+ km
- Signal strength, which is reported by the on-board LED indicator
- AP mode, client or WDS with Traffic shaping and QoS
Intelligent POE
Remote hardware reset circuitry of the Ubiquiti NanoStation Loco M5 allows for the device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation can easily become 802.3af 48V compliant through use of Ubiquiti’s Instant 802.3af adapter.
Remote reset is an additional option. Ubiquiti NanoStation M comes standard as 24V without remote reset. 
Please visit the Ubiquiti Firmware page for the latest Firmware upgrades
Ubiquiti airMAX NanoStation Loco M5 – Technical Specifications
System Information
- Processor Specs: Atheros MIPS 24KC, 400 MHz
- Memory: 32 MB SDRAM, 8 MB Flash
- Networking Interface: (1) 10/100 Ethernet Port
Regulatory/Compliance Information
- Wireless Approvals: FCC Part 90Z
- RoHS Compliance: Yes
Physical/Electrical/Environmental
- Dimensions (mm): 163 x 31 x 80
- Weight: 0.18 kg
- Power Supply (PoE): 24V, 0.5A
- Max. Power Consumption: 5.5 W
- Gain: 13 dBi
- Polarisation: Dual Linear
- Enclosure Characteristics: Outdoor UV Stabilised Plastic
- Mounting: Pole Mounting Kit Included
- Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
- Operating Temperature: -30 to 75° C
- Operating Humidity: 5 to 95% Condensing
- Shock and Vibration: ETSI300-019-1.4
Operating Frequency Summary (MHz)
- Worldwide: 5170 – 5875
- USA: 5725 – 5850
- USA DFS: 5250 – 5850
Antenna Information
- Gain: 13 dBi
- Cross-pol Isolation: 20 dB Minimum
- Max. VSWR: 1.4:1
- Beamwidth: 45° (H-pol) / 45° (V-pol) / 45° (Elevation)
The post Ubiquiti NanoStation Loco M5 MIMO Wireless Bridge/Base Station first appeared on Ubiquiti Kenya.
]]>- Frequency 5GHz
- Throughput 450+ Mbps
- Range 10+ km
The post Ubiquiti NanoStation LOCO 5AC Access Point first appeared on Ubiquiti Kenya.
]]>The Ubiquiti airMAX NanoStation AC Loco (LOCO5AC) is an indoor/outdoor, compact, high-performance CPE, featuring airMAX AC technology and a dedicated WiFi radio for management.
Ubiquiti NanoStation AC Loco (LOCO5AC) Key Features
- Frequency 5GHz
- Throughput 450+ Mbps
- Range 10+ km
- Management Radio
- UNMS App Compatible
The LOCO5AC gets maximum gain out of the smallest footprint. The low cost, high-performance, and small form factor makes this CPE extremely versatile and economical to deploy.
Sleek Industrial Design
The NanoStation LOCO5AC represents the next evolution of the iconic CPE design that revolutionised the Wireless ISP industry.
Improved Surge Protection
This device features enhanced protection against ESD events.
Management WiFi Radio
Each CPE integrates a separate WiFi radio for fast and easy setup using your mobile device.
Deployment Example
Ubiquiti NanoStation AC Loco (LOCO5AC) – Technical Specifications
General
- Dimensions: 179 x 77.5 x 59.1 mm (7.05 x 3.05 x 2.33″)
- Weight: 180 g (6.35 oz)
- Power Supply: 24V, 0.5A Gigabit PoE Supply*
- Max. Power Consumption: 8.5W
- Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Gain: 13 dBi
- Networking Interface: 10/100/1000 Mbps Ethernet Port
- Channel Bandwidths: 10/20/30/40/50/60/80 MHz
- Processor Specs: Atheros MIPS 74Kc, 560 MHz
- Memory: 64 MB DDR2
- Cross-pol Isolation:
- 20 dB Minimum
- Max. VSWR 1.8:1
- Beamwidth: 45 degrees (H-pol) / 45 degrees (V-pol) / 45 degrees (Elevation)
- Polarisation: Dual Linear
- Enclosure: Outdoor UV Stabilised Plastic
- LEDs: (1) Power
- Mounting: Pole-Mount (Kit Included)
- Operating Temperature: -40 to 70 C (-40 to 158 F)
- Operating Humidity: 5 to 95% Noncondensing
- RoHS Compliance: Yes
- ESD/EMP Protection: ±24kV Contact/Air
- Shock & Vibration: ETSI300-019-1.4
- Certifications: CE, FCC, IC
- Operating Frequency (MHz): 5150 – 5875
- Management Radio (MHz): 2412 – 2472
The post Ubiquiti NanoStation LOCO 5AC Access Point first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti NanoStation Mount (Window/Wall Mount) NS-WM first appeared on Ubiquiti Kenya.
]]>The post Ubiquiti NanoStation Mount (Window/Wall Mount) NS-WM first appeared on Ubiquiti Kenya.
]]>