- Range: up to 124 mi (200 km)
- Up to 525 Mbps Real Throughput
- Full Band Certification including DFS
- Operates using the 3 GHz Band
- Hybrid Division Duplexing (HDD)
- Low Latency
- Enhanced Spectral Efficiency
- Operation in Unlicensed Bands
- Co-Location
- GPS Sync & Clean Power Output
The post Ubiquiti airFiber AF-3X 3 GHz Backhaul Radio – Complete Link first appeared on Ubiquiti Kenya.
]]>The Ubiquiti AF-3X forms part of the airFiber X of point-to-point backhaul family of radios. It operates on the 3GHz frequency, offering interference-free operation. A license is required and must be licensed with the FCC to operate this radio. Utilizing INVICTUS, this radio features a processing engine that surpasses all the limitations inherent to generic Wi-Fi chips. This helps to provide superior performance, long range capability, DFS flexibility, and higher delivered throughput.
The Ubiquiti
The Ubiquiti AF-3X forms part of the
The Ubiquiti AF-3X forms part of the airFiber X of point-to-point backhaul family of radios. It operates on the 3GHz frequency, offering interference-free operation. A license is required and must be licensed with the FCC to operate this radio. Utilizing INVICTUS, this radio features a processing engine that surpasses all the limitations inherent to generic Wi-Fi chips. This helps to provide superior performance, long range capability, DFS flexibility, and higher delivered throughput.
The Ubiquiti airFiber AF-3X is a 3 GHz Backhaul Radio. The 3 GHz frequency band offersinterference-free operation,enabling the AF-3X to provide ahigh-reliability backhaul solution,although a license may berequired in some regions.
Ubiquiti airFiber AF-3X Features
- 500 + Mbps Throughput
- 3 GHz Frequency
- 2×2 MIMO connectorized
- Model Number: AF-3X
- Up to 200+ km Range
The Ubiquiti airFiber AF-3X features 2×2 MIMO connectorised OFDM airFiber radio in small, lightweight form factor; 3300MHz-3900MHz frequency range, with channel widths at 3.5MHz, 5MHz, 7MHz, 10MHz, 14MHz, 20MHz, 28MHz, 30MHz, 40MHz, 50MHz, 56MHz.
Engineered for Performance
Ubiquiti’s INVICTUS
custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications.
Deployment Flexibility
The compact form factor allows the airFiber X to be used with airFiber Slant 45 antennas, or instantly upgrade a 5 GHz Rocketlink that uses a RocketDishRD‑5G30/RD‑5G34* antenna.
Carrier Backhaul for the World
Deploy the 2.4, 3, 4, 5 or 11 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber X features multiple channel width options to suit your deployment needs – up to 11 different channel sizes available for the AF-2X or AF-3X.
Optimal Operation and Channel Configuration
Channel width flexibility allows you to independently configure TX and RX channel frequencies and place them anywhere within the radio band to avoid local interference. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements.
Ubiquiti airFiber AF-3X – Technical Specification
General
- Dimensions:
– Radio: 224 x 82 x 48 mm (8.82 x 3.23 x 1.89″)
– Box: 261 x 107 x 107 mm (10.28 x 4.21 x 4.21″) - Weight:
– Radio: 0.35 kg (0.77 lb)
– Box: 1.1 kg (2.43 lb) - RF Connectors:
– (2) RP-SMA Weatherproof (CH0, CH1)
– (1) SMA Weatherproof (GPS) - GPS Antenna: External, Magnetic Base
- Power Supply: 24V, 1A PoE Gigabit Adapter (Included)
- Power Method:
– Passive Power over Ethernet
– Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-) - Max. Power Consumption: 17W @ Max. Power/Duty Cycle
- Supported Voltage Range: +18 to +54VDC
- Automatic Transmit Power Control (ATPC): Yes
- Mounting:
– airFiber X Mount (Rocket Mount Compatible)
– GPS Pole Mount (Included) - Certifications: CE, FCC, IC
- Operating Temperature: -40 to 55° C (-40 to 131° F)
Networking Interface
- Data Port: (1) 10/100/1000 Ethernet
- Port Management Port: (1) 10/100 Ethernet Port
System
- Processor: INVICTUS IC
- Maximum Throughput: 687 Mbps
- Maximum Range: 200+ km
- Packets per Second: 1+ Million
- Encryption: 128-bit AES
- OS: airOS F
- Wireless Modes: Master/Slave
- Latency Half Duplex Mode: < 2 ms at Full Throughput
- MTU (Maximum Transmission Unit): Up to 9600
Radio
- Frequency Range: 3300-3900 MHz (Dependent on Regulatory Region)
- Max. Conducted TX Power: 29 dBm (Dependent on Regulatory Region)
- Frequency Accuracy:
– ± 2.5 ppm without GPS Synchronisation
– ± 0.2 ppm with GPS Synchronisation - Channel Bandwidth:
– 3.5/5/7/10/14/20/28/30/40/50/56 MHz Selectable
– Programmable Uplink and Downlink Duty Cycles
– Independently Programmable TX and RX Frequencies
Suggested Max. TX Power
- 8x: 21 – 22 dBm
- 6x: 23 – 24 dBm
- 4x: 25 – 26 dBm
- 2x: 29 dBm
- 1x: 29 dBm
X of point-to-point backhaul family of radios. It operates on the 3GHz frequency, offering interference-free operation. A license is required and must be licensed with the FCC to operate this radio. Utilizing INVICTUS, this radio features a processing engine that surpasses all the limitations inherent to generic Wi-Fi chips. This helps to provide superior performance, long range capability, DFS flexibility, and higher delivered throughput.
The Ubiquiti airFiber AF-3X is a 3 GHz Backhaul Radio. The 3 GHz frequency band offersinterference-free operation,enabling the AF-3X to provide ahigh-reliability backhaul solution,although a license may berequired in some regions.
Ubiquiti airFiber AF-3X Features
- 500 + Mbps Throughput
- 3 GHz Frequency
- 2×2 MIMO connectorized
- Model Number: AF-3X
- Up to 200+ km Range
The Ubiquiti airFiber AF-3X features 2×2 MIMO connectorised OFDM airFiber radio in small, lightweight form factor; 3300MHz-3900MHz frequency range, with channel widths at 3.5MHz, 5MHz, 7MHz, 10MHz, 14MHz, 20MHz, 28MHz, 30MHz, 40MHz, 50MHz, 56MHz.
Engineered for Performance
Ubiquiti’s INVICTUS custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications.
Deployment Flexibility
The compact form factor allows the airFiber X to be used with airFiber Slant 45 antennas, or instantly upgrade a 5 GHz Rocketlink that uses a RocketDishRD‑5G30/RD‑5G34* antenna.
Carrier Backhaul for the World
Deploy the 2.4, 3, 4, 5 or 11 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber X features multiple channel width options to suit your deployment needs – up to 11 different channel sizes available for the AF-2X or AF-3X.
Optimal Operation and Channel Configuration
Channel width flexibility allows you to independently configure TX and RX channel frequencies and place them anywhere within the radio band to avoid local interference. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements.
Ubiquiti airFiber AF-3X – Technical Specification
General
- Dimensions:
– Radio: 224 x 82 x 48 mm (8.82 x 3.23 x 1.89″)
– Box: 261 x 107 x 107 mm (10.28 x 4.21 x 4.21″) - Weight:
– Radio: 0.35 kg (0.77 lb)
– Box: 1.1 kg (2.43 lb) - RF Connectors:
– (2) RP-SMA Weatherproof (CH0, CH1)
– (1) SMA Weatherproof (GPS) - GPS Antenna: External, Magnetic Base
- Power Supply: 24V, 1A PoE Gigabit Adapter (Included)
- Power Method:
– Passive Power over Ethernet
– Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-) - Max. Power Consumption: 17W @ Max. Power/Duty Cycle
- Supported Voltage Range: +18 to +54VDC
- Automatic Transmit Power Control (ATPC): Yes
- Mounting:
– airFiber X Mount (Rocket Mount Compatible)
– GPS Pole Mount (Included) - Certifications: CE, FCC, IC
- Operating Temperature: -40 to 55° C (-40 to 131° F)
Networking Interface
- Data Port: (1) 10/100/1000 Ethernet
- Port Management Port: (1) 10/100 Ethernet Port
System
- Processor: INVICTUS IC
- Maximum Throughput: 687 Mbps
- Maximum Range: 200+ km
- Packets per Second: 1+ Million
- Encryption: 128-bit AES
- OS: airOS F
- Wireless Modes: Master/Slave
- Latency Half Duplex Mode: < 2 ms at Full Throughput
- MTU (Maximum Transmission Unit): Up to 9600
Radio
- Frequency Range: 3300-3900 MHz (Dependent on Regulatory Region)
- Max. Conducted TX Power: 29 dBm (Dependent on Regulatory Region)
- Frequency Accuracy:
– ± 2.5 ppm without GPS Synchronisation
– ± 0.2 ppm with GPS Synchronisation - Channel Bandwidth:
– 3.5/5/7/10/14/20/28/30/40/50/56 MHz Selectable
– Programmable Uplink and Downlink Duty Cycles
– Independently Programmable TX and RX Frequencies
Suggested Max. TX Power
- 8x: 21 – 22 dBm
- 6x: 23 – 24 dBm
- 4x: 25 – 26 dBm
- 2x: 29 dBm
- 1x: 29 dBm
AF-3X is a 3 GHz Backhaul Radio. The 3 GHz frequency band offersinterference-free operation,enabling the AF-3X to provide ahigh-reliability backhaul solution,although a license may berequired in some regions.
Ubiquiti airFiber AF-3X Features
- 500 + Mbps Throughput
- 3 GHz Frequency
- 2×2 MIMO connectorized
- Model Number: AF-3X
- Up to 200+ km Range
The Ubiquiti airFiber AF-3X features 2×2 MIMO connectorised OFDM airFiber radio in small, lightweight form factor; 3300MHz-3900MHz frequency range, with channel widths at 3.5MHz, 5MHz, 7MHz, 10MHz, 14MHz, 20MHz, 28MHz, 30MHz, 40MHz, 50MHz, 56MHz.
Engineered for Performance
Ubiquiti’s INVICTUS custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications.
Deployment Flexibility
The compact form factor allows the airFiber X to be used with airFiber Slant 45 antennas, or instantly upgrade a 5 GHz Rocketlink that uses a RocketDishRD‑5G30/RD‑5G34* antenna.
Carrier Backhaul for the World
Deploy the 2.4, 3, 4, 5 or 11 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber X features multiple channel width options to suit your deployment needs – up to 11 different channel sizes available for the AF-2X or AF-3X.
Optimal Operation and Channel Configuration
Channel width flexibility allows you to independently configure TX and RX channel frequencies and place them anywhere within the radio band to avoid local interference. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements.
Ubiquiti airFiber AF-3X – Technical Specification
General
- Dimensions:
– Radio: 224 x 82 x 48 mm (8.82 x 3.23 x 1.89″)
– Box: 261 x 107 x 107 mm (10.28 x 4.21 x 4.21″) - Weight:
– Radio: 0.35 kg (0.77 lb)
– Box: 1.1 kg (2.43 lb) - RF Connectors:
– (2) RP-SMA Weatherproof (CH0, CH1)
– (1) SMA Weatherproof (GPS) - GPS Antenna: External, Magnetic Base
- Power Supply: 24V, 1A PoE Gigabit Adapter (Included)
- Power Method:
– Passive Power over Ethernet
– Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-) - Max. Power Consumption: 17W @ Max. Power/Duty Cycle
- Supported Voltage Range: +18 to +54VDC
- Automatic Transmit Power Control (ATPC): Yes
- Mounting:
– airFiber X Mount (Rocket Mount Compatible)
– GPS Pole Mount (Included) - Certifications: CE, FCC, IC
- Operating Temperature: -40 to 55° C (-40 to 131° F)
Networking Interface
- Data Port: (1) 10/100/1000 Ethernet
- Port Management Port: (1) 10/100 Ethernet Port
System
- Processor: INVICTUS IC
- Maximum Throughput: 687 Mbps
- Maximum Range: 200+ km
- Packets per Second: 1+ Million
- Encryption: 128-bit AES
- OS: airOS F
- Wireless Modes: Master/Slave
- Latency Half Duplex Mode: < 2 ms at Full Throughput
- MTU (Maximum Transmission Unit): Up to 9600
Radio
- Frequency Range: 3300-3900 MHz (Dependent on Regulatory Region)
- Max. Conducted TX Power: 29 dBm (Dependent on Regulatory Region)
- Frequency Accuracy:
– ± 2.5 ppm without GPS Synchronisation
– ± 0.2 ppm with GPS Synchronisation - Channel Bandwidth:
– 3.5/5/7/10/14/20/28/30/40/50/56 MHz Selectable
– Programmable Uplink and Downlink Duty Cycles
– Independently Programmable TX and RX Frequencies
Suggested Max. TX Power
- 8x: 21 – 22 dBm
- 6x: 23 – 24 dBm
- 4x: 25 – 26 dBm
- 2x: 29 dBm
- 1x: 29 dBm
The post Ubiquiti airFiber AF-3X 3 GHz Backhaul Radio – Complete Link first appeared on Ubiquiti Kenya.
]]>