Ubiquiti LiteBeam 5AC Gen2 5GHz 23dBi CPE (LBE-5AC-Gen2): Lightweight airMAX AC Dish with Gigabit Port and Wi-Fi Management Radio
The Ubiquiti LiteBeam 5AC Gen2 (LBE-5AC-Gen2) is an outdoor 5GHz airMAX AC customer premises equipment (CPE) radio with a 23dBi directional dish antenna and 2×2 MIMO dual-polarised design. It delivers up to 450+ Mbps real TCP/IP throughput and connects through one Gigabit Ethernet port, so a fast WISP or fibre-fed link is not limited at the LAN side. In addition, a dedicated 2.4GHz management radio lets installers set it up from a phone with the UISP mobile app, with no laptop needed on the roof. Furthermore, its tighter beamwidth focuses RF energy in one direction, which filters out noise from neighbouring networks. Because it weighs just 800g and assembles quickly, one installer can carry and aim it, while a mount with separate azimuth and elevation adjustment and a built-in bubble level speeds up alignment.
In practice, the LiteBeam 5AC Gen2 is the standard subscriber radio for many airMAX AC networks. For example, a WISP serving estates in Syokimau or Ruiru can fit one on each client’s roof and point it at a LiteAP AC sector on a nearby mast. Similarly, a business can pair two units as a point-to-point bridge to link a branch office, warehouse or borehole site back to a head office where staff use HP Desktops. Compared with the older LiteBeam M5, it adds airMAX AC throughput, a Gigabit port and app-based setup. Meanwhile, it is rated for 200km/h wind survivability and -40 to 70°C operation, and it draws only 7W, so a small UPS keeps the link up through KPLC outages.
Key Features
In short, this airMAX AC CPE stands out in five areas:
- 23dBi dish antenna with 2×2 MIMO dual polarisation on 5GHz
- Up to 450+ Mbps throughput via airMAX AC
- Gigabit Ethernet port with 24V passive PoE adapter included
- Dedicated Wi-Fi management radio for UISP mobile app setup
- 800g build, 200km/h wind rating and 7W max power draw
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti LBE-5AC-Gen2:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP airMAX) |
| Model | LBE-5AC-Gen2 (LiteBeam 5AC Gen 2) |
| Product Type | 5GHz airMAX AC CPE / PtP bridge |
| Operating Frequency | 5150–5875MHz (worldwide) |
| Management Radio | 2412–2472MHz (worldwide); 2412–2462MHz (USA) |
| Antenna Gain | 23dBi |
| MIMO / Polarisation | 2×2, dual linear |
| Throughput | Up to 450+ Mbps real TCP/IP |
| Range | 15+ km |
| Max. Output Power | 25dBm |
| Modulation | BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
| Software | airOS 8 with airView spectrum analyser |
| Processor | MIPS 24KC, 560MHz |
| Memory | 64MB DDR2 |
| Networking Interface | 1 x 10/100/1000 Ethernet port |
| Power Method | Passive PoE (pairs 4, 5+; 7, 8 return) |
| Power Supply | 24V, 0.3A Gigabit PoE adapter (included) |
| Supported Voltage Range | 22–27V DC |
| Max. Power Consumption | 7W |
| ESD/EMP Protection | ±24kV contact/air |
| Enclosure | Reflector SGCC steel; UV-stabilised PC plastic |
| Mounting | Pole mount kit with azimuth and elevation adjustment (included) |
| Dimensions | 358 x 271.95 x 272.5mm |
| Weight | 800g (without mount); 980g (with mount) |
| Wind Survivability | 200km/h |
| Wind Loading | 275N at 200km/h |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5–95% non-condensing |
| Certifications | CE, FCC, IC; NDAA compliant |
Who This LiteBeam Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- Wireless internet service providers (WISPs) installing subscriber radios on homes and offices
- Businesses and farms linking a branch, warehouse or gatehouse to head office by PtP bridge
- Installers who want quick app-based setup and a light dish one person can mount and aim


Reviews
There are no reviews yet.