Ubiquiti PoE-48 PoE Adapter (POE-48-24W-G-KIT) – 48V 24W Gigabit Passive PoE Injector
The Ubiquiti PoE-48 PoE Adapter (POE-48-24W-G-KIT) is a single-port passive PoE injector that delivers 48V DC at 0.5A (24W) and full Gigabit Ethernet data to a Ubiquiti device over one network cable. It is the Gigabit version of the PoE-48, so it suits 48V passive radios and access points whose links run faster than 100Mbps. Power travels on pins 4, 5 (+) and 7, 8 (−), the standard Ubiquiti 2-pair layout. In addition, it accepts 100–240V AC mains through an IEC C6 inlet at 80%+ efficiency, and a power cable is included. Built-in differential and common-mode surge protection, clamping protection and an earth-grounded AC cable help shield the device and the network from static and voltage spikes. The housing measures 92 x 60 x 33mm and weighs 159g.
Wireless links between buildings now often carry several hundred megabits, so a 10/100 injector can quietly cap a link’s speed. By contrast, this Gigabit model passes the full throughput of the radio to the switch. For example, a company in Upper Hill can bridge two office blocks with a 48V radio link and keep full speed on the shared connection. Similarly, a resort in Diani can power a 48V access point by the pool from the reception rack while guests stream video. Furthermore, the NDAA-compliant design suits organisations with procurement rules for network hardware. However, the output is 48V passive only, not 802.3af/at, and it has no reset button or remote reset. Therefore, always confirm the device lists 48V passive PoE input before connecting it.
Key Features
In short, this Gigabit PoE adapter stands out in five areas:
- 48V DC at 0.5A (24W) passive PoE output
- Gigabit Ethernet data pass-through
- Surge and clamping protection with an earth-grounded AC cable
- 80%+ efficiency from 100–240V AC input
- Power cable included, NDAA compliant
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti POE-48-24W-G:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP) |
| Model | POE-48-24W-G (PoE-48) |
| Product Type | Passive PoE injector (single port) |
| Output Voltage | 48V DC @ 0.5A |
| Max. Output Power | 24W |
| PoE Type | 48V passive |
| 2-Pair Powering | Pins 4, 5 (+) and 7, 8 (−) |
| 4-Pair Powering | Not supported |
| Gigabit LAN Port | Yes |
| Data IN / PoE Ports | RJ45 shielded sockets |
| LAN Activity LED | No |
| Remote Reset | No |
| Reset Button | No |
| Rated Voltage | 100–240V AC, 50/60Hz |
| Input Current | 0.6A @ 120V AC; 0.4A @ 240V AC |
| Inrush Current | <65A peak @ 120V AC; <130A peak @ 230V AC |
| AC Connector | IEC-320 C6 (earth-grounded AC cable) |
| Power Cable | Included |
| Efficiency | 80%+ |
| Output Ripple | 1% max. |
| Switching Frequency | 65kHz |
| Line Regulation | ≤3% |
| Load Regulation | ≤5% |
| Surge Protection | Differential and common mode |
| Max. Surge Discharge | 1500A (8/20μs), power |
| Peak Pulse Current | 36A (10/1000μs), data |
| Clamping Protection | 11V data, 60V power |
| Shunt Capacitance | <5pF, data |
| Response Time | <1ns |
| Dimensions | 92 x 60 x 33mm |
| Weight | 159g |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -30 to 70°C |
| Operating Humidity | 35–95% non-condensing |
| Certifications | CE, FCC, IC, UL |
| NDAA Compliant | Yes |
Who This PoE Adapter Is Best Suited For
As a result of this combination of 48V output and Gigabit data, three types of users benefit most:
- Businesses and campuses running Gigabit-capable 48V radio links between buildings
- Hotels and resorts powering 48V passive access points from an indoor rack
- WISPs and integrators replacing 10/100 PoE-48 injectors that limit link speed


Reviews
There are no reviews yet.