Ubiquiti EdgePoint EP-R8 WISP Control Point Layer-3 Router

The Ubiquiti EdgePoint EP-R8 Layer 3 router is an intelligent WISP Control Point with FiberProtect. The Ubiquiti EdgePoint EP-R8 is the first application-specific designed WISP control point and combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.

Ubiquiti EdgePoint EP-R8 Key Features

Weatherproof Enclosure for Outdoor Use
Powerful Routing or Switching Features
Fiber Backhaul Capability

Breakthrough in Tower Deployment
The Ubiquiti EdgePoint EP-R8 features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity. Breakthrough in Tower Deployment

Purpose-Built for WISP Control
The first application-specific designed WISP control point, the Ubiquiti EdgePoint EP-R8 combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.

Advanced Routing Applications
Powerful routing features – such as link balancing – provide redundancy and increased performance for outdoor wireless links.
All-in-One Design
A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.

Ubiquiti EdgePoint EP-R8 – Technical Specifications

General

Dimensions:
– 326.6 x 382.7 x 88.8 mm (12.86 x 15.07 x 3.50″)
– With Wall-Mount: 326.6 x 382.7 x 105.5 mm (12.86 x 15.07 x 4.15″)
Weight:
– 3.4 kg (7.50 lb)
– With Wall-Mount: 3.8 kg (8.38 lb)
Max. Power Consumption: 40W (Excludes PoE Output)
Power Input:
– (1) DC Terminal Block (OR)
– (2) RJ45 (PoE In and eth0) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs)
Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power)
VDC Input: 54VDC, 6A
Passive PoE Input: (2) 54V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 and PoE In (PoE In is DC Only, No Data)
Passive PoE Output:
– (2) 54V or 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth1 to eth2
– (5) 24V / 0.7A, 2 Pair (+4, 5; -7, 8) Passive PoE, eth3 to eth7
Power Monitoring:
– (1) DC Terminal Block, Input Power
– (2) RJ45, PoE In and eth0, Input Power
Supported Voltage Range: 56 to 42VDC
Button: Reset
LEDs:
– System: Power
– eth0: Speed/Link/Activity
– eth1 to eth7: Speed/Link/Activity, PoE
– SFP: Speed/Link/Activity
Ports:
– Serial Console Port: (1) RJ45 Serial Port
– PoE In Port: (1) RJ45 Port
– Data Ports: (6) 10/100/1000 RJ45 Ports, (2) 10/100/1000 RJ45/SFP Combination Ports
Processor: Dual-Core 600 MHz, MIPS64 with Hardware Acceleration for Packet Processing
System Memory: 2 GB DDR3-1600 RAM
Code Storage: 4 GB
Certifications:
– CE
– FCC
– IC
Pole/Wall Mount: Yes
Wind Loading: 153 N @ 200 km/h (34 lbf @ 125 mph)
Wind Survivability: 200 km/h (125 mph)
Operating Temperature: -40 to 65° C (-40 to 149° F)
Operating Humidity: 10 to 90% Noncondensing