Ubiquiti airMAX 5GHz LiteAP AC Access Point (LAP-120): Lightweight 120° Sector Base Station for Outdoor Point-to-Multipoint Links
The Ubiquiti LiteAP AC (LAP-120) is an outdoor 5GHz airMAX AC sector access point with a 16dBi integrated antenna that covers a 120° arc. It acts as the base station in a point-to-multipoint (PtMP) wireless network, so one unit on a mast can serve many client radios across a wide area. In addition, it delivers up to 450+ Mbps real TCP/IP throughput through 2×2 MIMO and connects to the wired network through one Gigabit Ethernet port. Because it weighs only 420g and mounts with a tool-less ball-joint bracket, a single installer can fit and aim it quickly. Furthermore, it runs airOS 8 with Ubiquiti’s airMAX TDMA protocol, which assigns each client a time slot and therefore reduces collisions on busy networks.
In practice, many Kenyan wireless internet service providers (WISPs) cover estates where fibre has not yet arrived. For example, a WISP in Kitengela or Ruiru can mount three LiteAP AC units on one mast to cover 360°, then connect homes and shops fitted with airMAX client radios. Similarly, a flower farm in Naivasha can link its pack house, staff quarters and offices, where managers work on HP Desktops, back to one internet connection. Meanwhile, the unit handles -40 to 70°C, 5 to 95% humidity and 200km/h wind, so it suits rooftops and masts in hot, dusty or coastal areas. However, it needs airMAX-compatible client devices, because standard Wi-Fi phones and laptops cannot connect to it directly.
Key Features
In short, this airMAX sector access point stands out in five areas:
- 16dBi, 120° sector antenna on the 5GHz band (5150–5875MHz)
- Up to 450+ Mbps real TCP/IP throughput with 2×2 MIMO
- airMAX AC TDMA protocol for PtMP networks with many clients
- Gigabit Ethernet port with 24V passive PoE adapter included
- Lightweight 420g body with tool-less ball-joint mount and 200km/h wind rating
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti LAP-120:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP airMAX) |
| Model | LAP-120 (LiteAP AC) |
| Product Type | 5GHz airMAX AC sector access point |
| Operating Frequency | 5150–5875MHz (worldwide) |
| Antenna Gain | 16dBi |
| Horizontal Coverage | 120° sector |
| MIMO | 2×2 |
| Throughput | Up to 450+ Mbps real TCP/IP |
| Channel Widths | PtP: 10/20/30/40/50/60/80MHz; PtMP: 10/20/30/40MHz |
| Operating Modes | Access Point, Station |
| Wireless Features | airMAX AC mode, PtMP airMAX mixed mode, long-range PtP link mode, automatic channel selection, automatic/manual TX power control, automatic distance (ACK timing) |
| Security | WPA2 |
| Software | airOS 8 |
| Networking Interface | 1 x 10/100/1000 Ethernet (RJ45) |
| Power Method | Passive PoE 2-pair (4, 5+; 7, 8 return) |
| Power Supply | 24V, 0.5A Gigabit PoE adapter (included) |
| Supported Voltage Range | 20–27V DC |
| Max. Power Consumption | 8W |
| ESD/EMP Protection | ±24kV contact and air |
| Dimensions (without mount) | 452.3 x 78.7 x 54.4mm |
| Weight (without mount) | 420g |
| Wind Survivability | 200km/h |
| Wind Loading | 77N at 200km/h |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5–95% non-condensing |
| Shock and Vibration | ETSI300-019-1.4 |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
| In the Box | LiteAP AC, ball-joint mount, metal strap, 24V 0.5A Gigabit PoE adapter, power cord |
Who This Sector Access Point Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- Wireless internet service providers (WISPs) that serve estates, towns and trading centres from one mast
- Farms, ranches and large compounds that link several outlying buildings to one internet connection
- Network integrators who build low-cost PtMP backhaul for CCTV, offices or campuses


Reviews
There are no reviews yet.