Ubiquiti PowerBeam ac High-Performance airMAX Bridge (PBE-5AC-620)

KSh 39,500

Out of StockCurrently unavailable
  • Fast DeliveryWe deliver to all towns & cities in Kenya
  • Warranty InclusiveThis product is covered by warranty

Out of stock

Ubiquiti PowerBeam ac High-Performance airMAX Bridge (PBE-5AC-620)
Ubiquiti PowerBeam ac High-Performance airMAX Bridge (PBE-5AC-620)
KSh 39,500

Ubiquiti PowerBeam ac High-Performance airMAX Bridge (PBE-5AC-620): 29dBi, 620mm Dish for Extended-Range Tower-to-Tower Links

The Ubiquiti PowerBeam ac (PBE-5AC-620) is an outdoor 5GHz airMAX AC bridge that combines a 620mm dish reflector with an integrated radio for 29dBi of gain. Its narrow, dual-linear polarised beam concentrates signal on the far end of the link and rejects noise from nearby transmitters, which suits extended-range point-to-point (PtP) backhaul between towers, hilltops and remote sites. In addition, it supports up to 450+ Mbps real TCP/IP throughput, connects through one Gigabit Ethernet port and draws a maximum of 8.5W. Furthermore, a dedicated Wi-Fi management radio lets installers configure it from a phone, and the dish is rated for 200km/h wind survivability. However, Ubiquiti designs it to be bought in pairs, with one unit at each end of the link.

In practice, the extra 2dBi over the 500mm model adds link margin on the longest hops, where rain fade or distant interference would otherwise cut throughput. For example, a WISP can link a core site in Nairobi to a relay mast in the Kitengela plains or the Machakos hills, then feed sector access points from there. Similarly, a ranch near Laikipia or a mining camp in Kitui can connect a remote operations office, where staff run HP Desktops, to a town office over a single wireless hop. Meanwhile, Ubiquiti’s airMAX AC TDMA protocol keeps latency low for VoIP and CCTV. Because the dish weighs 6.4kg and catches a lot of wind, mount it on a solid, guyed pole or tower.

Key Features

In short, this PowerBeam bridge stands out in five areas:

  • 29dBi gain from a 620mm dish reflector on 5GHz (5150–5875MHz)
  • Up to 450+ Mbps real TCP/IP throughput with airMAX AC
  • Dual-linear polarisation with 1.6:1 max. VSWR for noise immunity
  • 200km/h wind survivability and ±24kV ESD protection
  • Gigabit Ethernet port with 24V passive PoE adapter included

Technical Specifications

Specifically, the table below details every core specification of the Ubiquiti PBE-5AC-620:

SpecificationDetails
BrandUbiquiti (UISP airMAX)
ModelPBE-5AC-620 (PowerBeam ac)
Product Type5GHz airMAX AC dish bridge
Operating Frequency5150–5875MHz (worldwide)
Antenna Gain29dBi
Dish Reflector620mm
PolarisationDual-linear
Max. VSWR1.6:1
ThroughputUp to 450+ Mbps real TCP/IP
Channel SizesPtP: 10/20/30/40/50/60/80MHz; PtMP: 10/20/30/40MHz
Management RadioDedicated Wi-Fi management radio
Networking Interface1 x 10/100/1000 Ethernet (RJ45)
LEDsPower, LAN, WLAN, signal strength (software-adjustable)
Power Supply24V, 0.5A Gigabit PoE adapter (included)
Power MethodPassive PoE 2-pair (4, 5+; 7, 8 return)
Supported Voltage Range20–27V DC
Max. Power Consumption8.5W
ESD Protection±24kV air/contact
EnclosureOutdoor UV-stabilised polycarbonate
Dimensions620 x 620 x 386mm
Weight6.4kg
MountingPole mount (included)
Wind Survivability200km/h
Wind Loading1510N at 200km/h (without radome); 1830N at 200km/h (with radome)
RadomeNot included (IsoBeam ISO-BEAM-620 available separately)
Operating Temperature-40 to 70°C
Operating Humidity5–95% non-condensing
Wind-Driven Rain TestETS 300 019-1-4
CertificationsCE, FCC, IC; RoHS compliant

Who This PowerBeam Is Best Suited For

As a result of this combination of specs, three types of users benefit most:

  • WISPs and ISPs that run long tower-to-tower backhaul links across open country
  • Ranches, mines and remote camps that connect a far-off site to a town office or internet hub
  • Network integrators who need extra link margin in noisy or rain-prone 5GHz environments

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.