Ubiquiti U-POE-AT PoE+ Adapter 30W, 48V DC (U-POE-AT)

KSh 4,000

In StockReady to ship
  • Fast DeliveryWe deliver to all towns & cities in Kenya
  • Warranty InclusiveThis product is covered by warranty
Ubiquiti U-POE-AT PoE+ Adapter 30W, 48V DC (U-POE-AT)
Ubiquiti U-POE-AT PoE+ Adapter 30W, 48V DC (U-POE-AT)
KSh 4,000

Ubiquiti U-POE-AT PoE+ Adapter 30W, 48V DC (U-POE-AT): Plug-In PoE+ Power for UniFi Wi-Fi 6 and Wi-Fi 7 Access Points

The Ubiquiti U-POE-AT is a compact PoE+ adapter (single-port injector) that delivers up to 30W of power and Gigabit data to one UniFi device over a single Ethernet cable. It turns 100–240V AC mains into a 48V DC, 0.65A output on pins 4, 5 (+) and 7, 8 (−), which makes it a direct power source for UniFi PoE+ access points such as the U6 LR, U6 Pro, U6 Enterprise and U7 Pro. In addition, it includes surge, peak pulse and clamping protection, a grounded IEC-320 C6 AC cable and shielded RJ45 data-in and PoE sockets. As a result, a single unit replaces the need for a PoE switch when you add one access point.

For example, a family in Runda that wants Wi-Fi in an upstairs bedroom, or a small clinic in Nakuru that adds an access point to its waiting area, can simply run one cable from the router and plug the U-POE-AT into the nearest socket. Similarly, it suits wireless mesh setups, where an access point sits on a gatehouse or back office with no switch nearby. Furthermore, it frees up budget on a busy PoE switch that already powers cameras and phones. Because it runs from ordinary mains at 87% efficiency, you can also plug it into a small UPS so Wi-Fi stays up during KPLC outages. Meanwhile, staff on wired HP Desktops and wireless laptops share the same Gigabit network. However, the output is 48V DC, so use it only with PoE+ devices rated for 48V input.

Key Features

In short, this PoE+ adapter stands out in five areas:

  • Up to 30W PoE+ output at 48V DC, 0.65A
  • Gigabit LAN pass-through on shielded RJ45 data-in and PoE sockets
  • Surge, peak pulse and clamping protection in differential and common mode
  • Universal 100–240V AC input with 87% efficiency and an earthed IEC-320 C6 cable
  • Compact 93 x 62 x 35mm body weighing 156g

Technical Specifications

Specifically, the table below details every core specification of the Ubiquiti U-POE-AT:

SpecificationDetails
BrandUbiquiti UniFi
ModelU-POE-AT
Product TypePoE+ adapter (single-port injector)
ColourWhite
Max. PoE+ Output30W
Output Voltage48V DC @ 0.65A
Powering Method2-pair
Pin AssignmentPins 4, 5 (+) and 7, 8 (−)
Gigabit LAN PortYes
Data In / PoE PortsRJ45 shielded sockets
Rated Voltage100–240V AC, 50/60Hz
Input Current0.75A max.
AC ConnectorIEC-320 C6 (earth-grounded cable)
Inrush Current<100A peak @ 26°C
Efficiency87%
Switching Frequency70kHz max.
Output Ripple1% max.
Line Regulation≤3%
Load Regulation≤5%
Surge ProtectionDifferential and common mode
Max. Surge Discharge1500A (8/20μs), power
Peak Pulse Current36A (10/1000μs), data
Clamping Protection11V data, 60V power
Response Time<1ns
Shunt Capacitance<5pF, data
Dimensions93 x 62 x 35mm
Weight156g
Operating Temperature0 to 40°C
Storage Temperature-30 to 70°C
Operating Humidity10–95% non-condensing
NDAA CompliantYes
CertificationsCE, FCC, IC, UL, CCC

Who This PoE+ Adapter Is Best Suited For

As a result of this combination of specs, three types of users benefit most:

  • Homeowners and home offices who add one UniFi U6 or U7 access point without buying a PoE switch
  • Small businesses and clinics that extend Wi-Fi to a new room, floor or outbuilding with a single cable run
  • UniFi installers who need a low-cost spare to power mesh APs or offload a full PoE switch

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.