Ubiquiti PowerBeam ac High-Performance airMAX Bridge (PBE-5AC-620): 29dBi, 620mm Dish for Extended-Range Tower-to-Tower Links
The Ubiquiti PowerBeam ac (PBE-5AC-620) is an outdoor 5GHz airMAX AC bridge that combines a 620mm dish reflector with an integrated radio for 29dBi of gain. Its narrow, dual-linear polarised beam concentrates signal on the far end of the link and rejects noise from nearby transmitters, which suits extended-range point-to-point (PtP) backhaul between towers, hilltops and remote sites. In addition, it supports up to 450+ Mbps real TCP/IP throughput, connects through one Gigabit Ethernet port and draws a maximum of 8.5W. Furthermore, a dedicated Wi-Fi management radio lets installers configure it from a phone, and the dish is rated for 200km/h wind survivability. However, Ubiquiti designs it to be bought in pairs, with one unit at each end of the link.
In practice, the extra 2dBi over the 500mm model adds link margin on the longest hops, where rain fade or distant interference would otherwise cut throughput. For example, a WISP can link a core site in Nairobi to a relay mast in the Kitengela plains or the Machakos hills, then feed sector access points from there. Similarly, a ranch near Laikipia or a mining camp in Kitui can connect a remote operations office, where staff run HP Desktops, to a town office over a single wireless hop. Meanwhile, Ubiquiti’s airMAX AC TDMA protocol keeps latency low for VoIP and CCTV. Because the dish weighs 6.4kg and catches a lot of wind, mount it on a solid, guyed pole or tower.
Key Features
In short, this PowerBeam bridge stands out in five areas:
- 29dBi gain from a 620mm dish reflector on 5GHz (5150–5875MHz)
- Up to 450+ Mbps real TCP/IP throughput with airMAX AC
- Dual-linear polarisation with 1.6:1 max. VSWR for noise immunity
- 200km/h wind survivability and ±24kV ESD protection
- Gigabit Ethernet port with 24V passive PoE adapter included
Technical Specifications
Specifically, the table below details every core specification of the Ubiquiti PBE-5AC-620:
| Specification | Details |
|---|---|
| Brand | Ubiquiti (UISP airMAX) |
| Model | PBE-5AC-620 (PowerBeam ac) |
| Product Type | 5GHz airMAX AC dish bridge |
| Operating Frequency | 5150–5875MHz (worldwide) |
| Antenna Gain | 29dBi |
| Dish Reflector | 620mm |
| Polarisation | Dual-linear |
| Max. VSWR | 1.6:1 |
| Throughput | Up to 450+ Mbps real TCP/IP |
| Channel Sizes | PtP: 10/20/30/40/50/60/80MHz; PtMP: 10/20/30/40MHz |
| Management Radio | Dedicated Wi-Fi management radio |
| Networking Interface | 1 x 10/100/1000 Ethernet (RJ45) |
| LEDs | Power, LAN, WLAN, signal strength (software-adjustable) |
| Power Supply | 24V, 0.5A Gigabit PoE adapter (included) |
| Power Method | Passive PoE 2-pair (4, 5+; 7, 8 return) |
| Supported Voltage Range | 20–27V DC |
| Max. Power Consumption | 8.5W |
| ESD Protection | ±24kV air/contact |
| Enclosure | Outdoor UV-stabilised polycarbonate |
| Dimensions | 620 x 620 x 386mm |
| Weight | 6.4kg |
| Mounting | Pole mount (included) |
| Wind Survivability | 200km/h |
| Wind Loading | 1510N at 200km/h (without radome); 1830N at 200km/h (with radome) |
| Radome | Not included (IsoBeam ISO-BEAM-620 available separately) |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5–95% non-condensing |
| Wind-Driven Rain Test | ETS 300 019-1-4 |
| Certifications | CE, FCC, IC; RoHS compliant |
Who This PowerBeam Is Best Suited For
As a result of this combination of specs, three types of users benefit most:
- WISPs and ISPs that run long tower-to-tower backhaul links across open country
- Ranches, mines and remote camps that connect a far-off site to a town office or internet hub
- Network integrators who need extra link margin in noisy or rain-prone 5GHz environments


Reviews
There are no reviews yet.